Description of the Electronic Control System
This electronic control system is a very reliable device, suitable for irrigation and borehole pumps. This system can be easily attached to the pump, providing automatic control of the following functions:
- Automatically switches on or off when you open/close a tap.
- Protects your pump against dry-running
The pressure at which the pump automatically turns on can be set between 1.5 and 3.5 bar. The system's maximum pressure before turning off is 10 bar.
Assembly of the system:
First you must attach this system to the pump outlet. Thanks to the 1" screw size, this should be very easy with most common pumps. The electronic control system comes with a power outlet and plug. You simply have to place the pump's plug into the control system's power outlet. Then place the control system's plug in a power outlet connected to the mains. The control system measures the circuit after the pump. When you open a supply point, the system ensures that the pump automatically activates. After you close the supply point, the system ensures the pump automatically switches off. Moreover, the system continuously measures whether there is still water flowing through the pump. Should there be no water flow (e.g. because of a depleted water source), then the system will shut down the power supply to the pump. The red light on the system will then turn on, by which you can manually reset the system (by simply pressing the button).
Specifications of the Electronic Control System
- 0.5 kg
- 220 Volt
- Plastic (technopolymer)
- In and outlet: 1"