Product description
DAB is one of the best-selling brands of water pumps for consumers as well as for professionals. These pumps adhere to a very high standard of quality, with each pump being tested manually by a staff member before it is put on the market. This is the only way DAB can guarantee that you obtain the absolute best. They have a solution regarding almost any situation, whether it involves an industrial application or simply spraying a garden. DAB's professional quality is also reflected in its consumer line. The DAB pumps we replace for people are usually over ten years old.
This pump switches on or off automatically if you open or close a water point that is connected to the pump. In many cases, this feature is a considerable advantage: for example, when irrigating a garden with a hand-held sprayer, or supplying a toilet or washing machine with rainwater. It is also useful if you want to increase the water pressure in your home. Unlike standard garden water pumps, water pressure pumps - because of the difference in pressure - 'notice' when one or more water points are opened or closed. This is how the pump knows that it needs to start or stop. Standard water pressure pumps (which are mounted to a tank) are equipped with a mechanical switch, and the more advanced ones have electronic switches. Both systems have advantages and disadvantages. The mechanical switch is reliable but can either not be set or it is difficult to do so, while the electronic version can be set but is dependent on electricity.
The name says it all: this pump is protected from running dry. Most pumps cannot, if at all, operate dry for long, which usually ends in the pump immediately burning out and/or seizing. For example, this could happen if the source has run dry and the pump can no longer draw water from it. Garden and booster pumps are particularly sensitive to running dry. Some borehole pumps and somewhat more advanced garden pumps are already equipped with built-in dry-running protection. Others can be easily fitted with a dry-running protection system: for example, with a separate one or with the DAB Control-D. This definitely guarantees that the garden or booster pump will not run dry.
This pump can be installed horizontally and vertically, and the positioning will not affect the way it operates. However, it means that there is more flexibility in installing it. In many cases, this can make the difference between an available solution or no solution.
This pump is fitted with a speed controller, which is particularly handy for pressure-boosting pumps to which multiple water points are connected. If one water point is opened, the pump will start operating at a low level, and if several are opened, it will speed up to the required capacity. Pumps lacking such a device will start pumping at full speed, irrespective of the required capacity. These models are limited to the switch on/switch off mode, and are therefore considerably less energy efficient. As a result, speed controlling occurs mainly with a variable water supply and frequent or long-term use, such as to increase water pressure in your home. The DAB Easybox series is particularly useful to increase water pressure, and is therefore always fitted with a speed controller.
This pump is labelled as being 'quiet'. Of course, like any electric appliance, a pump can be heard, but special attention has been given to its noise level. Thanks to its ultra-low noise level, the pump is highly suitable to be placed indoors, without being disturbing. The perception of noise is subjective, of course, but no other pumps are quieter than these.
This pump is equipped with a water tank, which may be handy in a number of situations; for example, if the pump needs to supply water occasionally (drip watering). In that case, a pump without a tank will start pulsating (continuously switching on and off). A pump that is fitted with a tank can supply water from its tank so that the pump does not need to switch on immediately. Such pumps are very handy to use with, for instance, irrigation tubes and controlled irrigation, or for filling a toilet reservoir, which is usually also a gradual process. A second advantage of a tank is that it greatly reduces water hammer, the hydraulic shock - or ‘blows’ - that water pipes experience if a water supply point is opened hard and fast. Pumps that provide instant high pressure may increase instances of water hammer, and are therefore equipped with a (built-in) tank.