Tallas D-EBOOST 850
- Order before 17:00pm, delivered on 30-01-2021
- 2 year warranty
- 30-day reflection period
- Customers reviewed Waterpump.co.uk with a 4.7/5
- Max. pump capacity 3,180 l/h
- Max. delivery head 43 m / Pressure 4.3 bar (adjustable)
- Number of sprinklers / water points used at the same time: 2
Discount packages for the Tallas D-EBOOST 850
- Max. pump capacity 3,180 l/h
- Max. delivery head 43 m / Pressure 4.3 bar (adjustable)
- Number of sprinklers / water points used at the same time: 2

In addition to all the extras, this total package also includes the correct connectors and PTFE tape, so you can directly get started installing your pump.
- Dry-running resistant
- Switches on/off automatically
- Resistant to limescale and rust
- Handy, lightweight/easy to move
- Built-in water filter
- Provides adjustable pressure
- Quiet
- Space-saving design
- Lightweight
- Cannot run continuously, a maximum of 3 hours
- Has no tank (buffer) and switches on immediately with a small supply of water
This booster pump provides water whenever you need it. When a tap is opened, the device will switch on automatically and pump water from the water mains or source. This kit can also be used when a specific pre-set water pressure is not reached. Then the pump will also switch on immediately for a desired result. Furthermore, the pump is equipped with an integrated dry-running protection system, which means the pump switches off automatically if it is unable to draw water from the source. The pump is fitted with an integrated non-return valve and a pre-filter, which ensures that solid particles in the drawn water are kept outside the pump body. The pre-filter can be opened easily and cleaned with the supplied multitool. You can configure the pump's switch-on and switch-off pressure via the electronic interface on its side, which has been set to factory default based on the most common situations. However, you also have the option to deviate from this. The interface shows the pressure provided at that moment by means of LEDS.
Summary
- Provides sufficient pressure and capacity for one to two sprinklers
- The hose that can be used for this pump has a diameter of 1" for the delivery connection and 1" for the suction connection
- Draws water from a maximum depth of 8 metres
- The maximum delivery head is 43 metres, which equals 4.3 bar output
Contents of the kit:
- Tallas D-EBOOST 850 with integrated non-return valve and pre-filter
- Rubber anti-vibration feet
- Multitool for, among other things, opening the pre-filter
- Manual
-
- 43 metres
-
- 40 metres
- 200 l/h
-
- 35 metres
- 500 l/h
-
- 30 metres
- 1,100 l/h
-
- 25 metres
- 1,750 l/h
-
- 20 metres
- 2,350 l/h
-
- 15 metres
- 2,600 l/h
-
- 10 metres
- 2,800 l/h
-
- 5 metres
- 3,050 l/h
-
- 0 metres
- 3,200 l/h
General information | |
---|---|
Product package |
- Tallas D-EBOOST 850 with integrated non-return valve and pre-filter - Rubber anti-vibration feet - Multitool for - Among other things - Opening the pre-filter - Manual. |
Warranty | 2 year warranty |
SKU | 8059893096173 |
Physical specifications | |
Suction diameter | 1" |
Delivery diameter | 1" |
Material | Technopolymer |
Weight | 9,6 kg |
Dimensions (l x w x h) | 50 x 23 x 34,1 cm |
Technical information | |
Power consumption | 850 Watt |
Max. temperature of liquid | 0°C - 35°C |
Cable length | 1,5 metres |
Cable type | H07RN-F |
Functionalities | |
Pump type | Booster pump, Garden pump |
Applications | Garden irrigation, Rainwater use within / around the house, Water supply for cattle |
Max. pump capacity | 3,180 l/h |
Max. delivery head | 43 m / Pressure 4.3 bar (adjustable) |
Max. suction depth | 8 metres |
Suitable for prolonged use (> 3 hours) |
![]() |
Automatic on/off switch |
![]() |
Dry run protection |
![]() |
Inverter |
![]() |
Filter |
![]() |
Types of water this pump is able to process | |
Clean water |
![]() |
Rainwater |
![]() |
Groundwater |
![]() |
Slightly dirty water |
![]() |
Canal water |
![]() |
Lake water |
![]() |
River water |
![]() |
Ditchwater |
![]() |
Pond water |
![]() |
Muddy water |
![]() |
Salt water |
![]() |
Faecal matter / manure pit |
![]() |
Is this model too powerful or not powerful enough? Select below a different model from the same series.
Product | Pump capacity | Delivery head | Price |
---|---|---|---|
Tallas D-EBOOST 1100 | 3,750 l/h | 45 m / Pressure 4.5 bar (adjustable) | 219 |
Tallas D-EBOOST 850 | 3,180 l/h | 43 m / Pressure 4.3 bar (adjustable) | 174.99 |
Frequently asked questions
- What kind of water can I pump with this model?
- What can I use this pump for?
- Is the pump suitable for continuous operation?
- Is it advisable to use a pre-filter?
- How should the pump be installed?
- What is the advantage of a suction hose with a brass connection versus a plastic connection?
- The water to be drawn in by the pump is situated at a level lower than nine metres. How do I handle this?
- What happens if the water from the source is finished?
- Is the pump suitable for a drinking-water system?
- Can this pump be connected to the existing mains water pipes in my house?
- Is the pump supplied ready to use?
- What items does this kit include?
What kind of water can I pump with this model?
The Tallas D-EBOOST 850 Booster Pump is only suitable to pump clean water, i.e. water that is free from very large solid particles (< 2 mm).
This means that you can also pump water from a canal or ditch, but subject to certain conditions:
- We recommend making use of a suction hose with a brass connection (better filtration).
- We recommend making use of a pre-filter (this allows for extra filtering before the water enters the pump).
In addition, the water should not be colder than 0°C and not warmer than 35°C.
What can I use this pump for?
This pump is suitable for the following purposes:
- Watering, spraying, and irrigating a garden or lawn
- Hosing down a terrace, decking or garden furniture
- Draining spaces or wells
- Supplying water/rainwater for your washing machine, toilet, sink, or shower in a separate circuit
- Drinking water systems
Is the pump suitable for continuous operation?
No, the pump is not suitable for continuous operation.
Is it advisable to use a pre-filter?
If the water is virtually the same as drinking water, no pre-filter is needed.
However, if the water pumped contains solids - for example, water from a ditch or canal - we recommend using a pre-filter.
How should the pump be installed?
The pump and the entire connected system need to be protected against frost and inclement weather conditions.
Therefore, place the pump in a dry location with an ambient temperature from 5°C to 40°C, to allow the motor to cool sufficiently.
What is the advantage of a suction hose with a brass connection versus a plastic connection?
A suction hose with a brass connection is more solid and is fitted with a better suction filter.
That is exactly why we recommend installing this type of hose if you plan to pump water from a canal or ditch.
The water to be drawn in by the pump is situated at a level lower than nine metres. How do I handle this?
Generally, garden pumps and booster pumps can draw in water from a maximum depth of nine metres.
If the water is occasionally at a depth lower than nine metres, you will need to use a borehole pump,
which is placed in the well and usually has a delivery head of 50 metres and over.
Check our range of borehole pumps.
What happens if the water from the source is finished?
This is a water-cooled model pump, which means that it cools itself with the water it pumps.
When the water from the source is finished - for example, if the water level has dropped below nine metres - the pump will usually keep running with no water supply.
This is referred to as 'dry running' and may cause the pump to become overheated, which could ruin it.
However, the pump is fitted with an active system, which protects the pump immediately from running dry.
The Tallas D-Eboost 850 Booster Pump switches off automatically when no water is supplied.
Is the pump suitable for a drinking-water system?
Yes, this pump is made of technopolymer, and is therefore suitable for a drinking-water system.
Can this pump be connected to the existing mains water pipes in my house?
The pump can be connected to your existing mains water pipes, but you are advised to make use of a booster pump.
Is the pump supplied ready to use?
Yes, you can start using the pump immediately, but it is not supplied with accessories such as a suction hose, a filter, and a discharge hose.
If needed, these can be ordered conveniently from our webshop together with your pump.
Click here for available accessories for the Tallas D-Eboost 850 Booster Pump.
What items does this kit include?
- Tallas D-EBOOST 850 with integrated non-return valve and pre-filter
- Cable connection (1.5 m)
- Rubber anti-vibration feet
- Multitool for, among other things, opening the pre-filter
- Manual