Tallas D-BOOST 850
- Order before 17:00pm, delivered on 30-01-2021
- 2 year warranty
- 30-day reflection period
- Customers reviewed Waterpump.co.uk with a 4.7/5
- Max. pump capacity 3,180 l/h
- Max. delivery head 43 m / Pressure 4.3 bar
- Number of sprinklers / water points used at the same time: 2
Discount packages for the Tallas D-BOOST 850
- Max. pump capacity 3,180 l/h
- Max. delivery head 43 m / Pressure 4.3 bar
- Number of sprinklers / water points used at the same time: 2
- Switches on/off automatically
- Resistant to limescale and rust
- Handy, lightweight/easy to move
- Built-in water filter
- Inexpensive
- Quiet
- Including tank; handy for supplying a toilet or irrigation tube
- Cannot run continuously, a maximum of 3 hours
This booster pump provides water whenever you need it. When a tap is opened, the device will switch on automatically and pump water from the water mains or source. This set can also be used when a specific pre-set water pressure is not reached. Then the pump will also switch on immediately for a desired result. This pump has been designed for increasing water pressure, supplying water, or using water from wells and tanks for irrigation purposes. Thanks to the water tank (an 18-litre pressure vessel), the pump does not constantly switch on/off, which means it is more energy efficient, while less power is being used. Furthermore, water hammers in the pump are prevented, which will extend the pump's life. The pump is fitted with an integrated non-return valve and a pre-filter, which ensures that solid particles in the drawn water are kept outside the pump body. The pre-filter can be opened easily and cleaned with the supplied multitool.
Summary
- Provides sufficient pressure and capacity for one to two sprinklers
- The hose that can be used for this pump has a diameter of 1" for the delivery connection and 1" for the suction connection
- Draws water from a maximum depth of 8 metres
- The maximum delivery head is 43 metres, which equals 4.3 bar output
Contents of the kit:
- Tallas D-BOOST 850 with integrated non-return valve and pre-filter
- 18-litre pressure valve
- Rubber anti-vibration feet
- Multitool for, among other things, opening the pre-filter
- Manual
-
- 43 metres
-
- 40 metres
- 200 l/h
-
- 35 metres
- 500 l/h
-
- 30 metres
- 1,100 l/h
-
- 25 metres
- 1,750 l/h
-
- 20 metres
- 2,350 l/h
-
- 15 metres
- 2,600 l/h
-
- 10 metres
- 2,800 l/h
-
- 5 metres
- 3,050 l/h
-
- 0 metres
- 3,200 l/h
General information | |
---|---|
Product package |
- Tallas D-BOOST 850 with integrated non-return valve and pre-filter - Cable connection (1.5 m) - Rubber anti-vibration feet - Mounted 18-litre pressure valve - Multitool for - Among other things - Opening the pre-filter - Manual. |
Warranty | 2 year warranty |
SKU | 8059893096197 |
Physical specifications | |
Suction diameter | 1" |
Delivery diameter | 1" |
Material | Technopolymer |
Weight | 14 kg |
Dimensions (l x w x h) | 50 x 26 x 55,4 cm |
Technical information | |
Power consumption | 850 Watt |
Max. temperature of liquid | 0°C - + 35°C |
Cable length | 1,5 metres |
Cable type | H07RN-F |
Functionalities | |
Pump type | Booster pump, Garden pump |
Applications | Garden irrigation, Rainwater use within / around the house, Water supply for cattle |
Max. pump capacity | 3,180 l/h |
Max. delivery head | 43 m / Pressure 4.3 bar |
Max. suction depth | 8 metres |
Suitable for prolonged use (> 3 hours) |
![]() |
Automatic on/off switch |
![]() |
Dry run protection |
![]() |
Inverter |
![]() |
Filter |
![]() |
Types of water this pump is able to process | |
Clean water |
![]() |
Rainwater |
![]() |
Groundwater |
![]() |
Slightly dirty water |
![]() |
Canal water |
![]() |
Lake water |
![]() |
River water |
![]() |
Ditchwater |
![]() |
Pond water |
![]() |
Muddy water |
![]() |
Salt water |
![]() |
Faecal matter / manure pit |
![]() |
Is this model too powerful or not powerful enough? Select below a different model from the same series.
Product | Pump capacity | Delivery head | Price |
---|---|---|---|
Tallas D-BOOST 1100 | 3,750 l/h | 45 m / Pressure 4.5 bar | 219 |
Tallas D-BOOST 850 | 3,180 l/h | 43 m / Pressure 4.3 bar | 169 |
Frequently asked questions
- What is the advantage of a booster pump versus a garden pump?
- What can I use this pump for?
- Can this pump be connected to the existing mains water pipes in my house?
- What kind of water can I pump with this model?
- Is the pump suitable for continuous operation?
- How should the pump be installed?
- The water to be drawn in by the pump is situated at a level lower than nine metres. How do I handle this?
- What happens if the water from the source is finished?
- Is the pump suitable for a drinking-water system?
- Is the pump supplied ready to use?
- What items does this kit include?
What is the advantage of a booster pump versus a garden pump?
A booster pump is essentially a garden pump with a number of extra components, such as:
- An integrated pressure switch, which ensures that the pump switches on or off automatically if water supply is needed.
- A pressure vessel (water tank), which ensures that you instantly have water at your disposal, and the pump does not need to switch on until the water in the pressure vessel starts to run low.
As a result, the booster pump does not need to switch on if only small amounts of water (a few litres) are needed.
First the water from the pressure vessel is used and supplied where it is required.
As soon as the water level in the pressure vessel is about to drop too low, the pump switches on automatically to refill it.
In addition to saving energy, the system runs much more quietly, and ensures that you always have water instantly at your disposal.
What can I use this pump for?
This pump is suitable for the following purposes:
- Watering, spraying, and irrigating a garden or lawn
- Hosing down a terrace, decking or garden furniture
- Supplying water/rainwater for your washing machine, toilet, sink, shower, etc.
- Increasing water pressure
Can this pump be connected to the existing mains water pipes in my house?
Yes, this pump can be connected to the existing mains water pipes in your house. However, this is not recommended, because the pump’s high-pressure output is not controllable. For the most suitable system, opt for the DAB e.sybox mini.
What kind of water can I pump with this model?
The Tallas D-BOOST 850 is only suitable to pump clean water, i.e. water that is free from very large solid particles (< 2 mm).
This means that you can also pump water from a canal or ditch, but subject to certain conditions:
- We recommend making use of a suction hose with a brass connection (better filtration).
- We recommend making use of a pre-filter (this allows for extra filtering before the water enters the pump).
In addition, the water should not be colder than 0°C and not warmer than 35°C.
Is the pump suitable for continuous operation?
No, the pump is not suitable for continuous operation.
How should the pump be installed?
The pump and the entire connected system need to be protected against frost and inclement weather conditions.
Therefore, place the pump in a dry location with an ambient temperature from 5°C to 40°C, to allow the motor to cool sufficiently.
Furthermore, all connected pipes must be absolutely watertight and airtight to prevent damage and loss of performance.
The water to be drawn in by the pump is situated at a level lower than nine metres. How do I handle this?
Generally, garden pumps and booster pumps can draw in water from a maximum depth of nine metres.
If the water is occasionally at a depth lower than nine metres, you will need to use a borehole pump, which is placed in the well and usually has a delivery head of 50 metres and over.
Check our range of borehole pumps.
What happens if the water from the source is finished?
This is a water-cooled model pump, which means that it cools itself with the water it pumps.
When the water from the source is finished - for example, if the water level has dropped below nine metres - the pump will normally keep running with no water supply.
This is referred to as 'dry running' and may cause the pump to become overheated, which could ruin it.
This pump is not fitted with a dry-running protection system, which can be ordered separately. Please refer to the dry-running protection system.
Is the pump suitable for a drinking-water system?
Yes, this pump is made of technopolymer, and is therefore suitable for a drinking-water system.
Is the pump supplied ready to use?
Yes, you can start using the pump immediately, but it is not supplied with accessories such as a discharge hose.
If needed, these can be ordered conveniently from our webshop together with your pump.
Click here for available accessories for the Tallas D-BOOST 850.
What items does this kit include?
- Tallas D-BOOST 850 with integrated non-return valve and pre-filter
- Cable connection (1.5 m)
- Rubber anti-vibration feet
- Multitool for, among other things, opening the pre-filter
- Manual