DAB EuroInox 40/80 M + Active Driver
Immediately ready for use after unboxing Highly energy efficient, silent and has a high pressure capacity and water yield.
In stock
8019203472356
SKU
Regular Price
£1,148.00
Discount Price
£899.00
- Delivery: ± 3 weeks
- 2 year warranty
Specifications overview
- Max. pump capacity 7,200 litres per hour
- Max. delivery head 59 metres or max. 5,9 bar output (adjustable)
- Number of sprinklers / water points used at the same time: 5+
Tip by Stephen
This set provides you with all the items you need for reusing rainwater in the home. A great device for your toilet or washing machine, for example.
DAB EuroInox 40/80 M + Active Driver
£1,148.00
£899.00
Specifications overview
- Max. pump capacity 7,200 litres per hour
- Max. delivery head 59 metres or max. 5,9 bar output (adjustable)
- Number of sprinklers / water points used at the same time: 5+
Pros and cons
Product description - Equipped with dry-running protection
- Automatically switches on or off
- Adjustable capacity
- Adjustable pressure
- Can keep running continuously
- Silent
- Cost-saving
- Resistant to rust and lime
- Poor mobility
Contents of this package
- DAB EuroInox 40/80 M Irrigation Pump
- DAB Active Driver
- 2 l pressure vessel
- Cable for connection between pump and DAB Active Driver + power cord and plug
What is the benefit of a DAB Active Driver?
The DAB Active Driver is a inverter that can be connected to the DAB EuroInox 40/80M. This inverter ensures the pump only runs at the speed required to pump a precise amount of water from A to B at the right pressure. This means that the pump will not always run at full speed, guaranteeing significant energy savings. Moreover, when required, the pump carefully adjusts its speed, meaning the motor will not be overburdened.
Product description
The DAB EuroInox 40/80 M Irrigation Pump is a high quality pump from top brand DAB. This pump is known for its high pumping capacity and great water yield.
Moreover, the pump can significantly increase the overall pressure in your water pipes. The pump is often used for rainwater supply in and around the home. Thanks to its low noise level (67 dB), the DAB EuroInox 40/80M is suitable for indoor use.
- Provides sufficient pressure and capacity for an average of 7 sprinklers
- The hose used for this pump has a delivery diameter of 1" and suction diameter of of X1"
- Sucks up water from a maximum depth of 8 m.
- The maximum head rate is 59 m, which is equal to an output of 5,9 bar
Recommended combinations
Flow-rate table
1"
1"
5+
-
- 59 metres
-
- 55 metres
- 2,000 l/h
-
- 50 metres
- 3,300 l/h
-
- 45 metres
- 4,050 l/h
-
- 40 metres
- 4,650 l/h
-
- 35 metres
- 5,300 l/h
-
- 30 metres
- 5,750 l/h
-
- 25 metres
- 6,300 l/h
-
- 20 metres
- 6,800 l/h
-
- 15 metres
- 7,200 l/h
-
- 10 metres
- 7,200 l/h
-
- 5 metres
- 7,200 l/h
-
- 0 metres
- 7,200 l/h
General information | |
|---|---|
| Product package |
- DAB EuroInox 40/80 M - DAB Active Driver - All connection cables - 2 l pressure vessel and manual |
| Warranty | 2 year warranty |
| SKU | 8019203472356 |
Physical specifications | |
| Suction diameter | 1" |
| Delivery diameter | 1" |
| Material | Stainless Steel |
| Weight | 19 kg |
| Dimensions (l x w x h) | 45,8 x 17,4 x 20,3 cm |
Technical information | |
| Power consumption | 1000 Watt (The inverter ensures a fluctuating wattage depending on use. On average, the pump has a wattage of 250 Watts) |
| Max. temperature of liquid | 40°C |
| Cable length | Length connection cable This pump comes with all required cables for connecting the DAB Active Driver to the DAB EuroInox 40/80M + power cord and plug. |
Functionalities | |
| Pump type | Booster pump, Garden pump |
| Max. pump capacity | 7,200 litres per hour |
| Max. delivery head | 59 metres or max. 5,9 bar output (adjustable) |
| Max. suction depth | 8 metres |
| Suitable for prolonged use (> 3 hours) |
 |
| Automatic on/off switch | |
| Dry run protection |
 |
| Inverter |
|
| Filter |
|
Types of water this pump is able to process | |
| Clean water |
|
| Rainwater |
- in the presence of sand/grit i.c.w. 5' Filter for solids
|
| Groundwater |
- in the presence of sand/grit i.c.w. 5' Filter for solids
|
| Slightly dirty water |
- i.c.w. 5' Filter for solids
|
| Canal water |
- i.c.w. 5' Filter for solids
|
| Lake water |
- i.c.w. 5' Filter for solids
|
| River water |
- i.c.w. 5' Filter for solids
|
| Ditchwater |
- i.c.w. 5' Filter for solids
|
| Pond water |
- i.c.w. 5' Filter for solids
|
| Muddy water |
|
| Salt water |
|
| Faecal matter / manure pit |
|
Best alternatives
-
PriceMax. pump capacityMax. delivery headNumber of sprinklers / water points used at the same time
-
Current productDAB EuroInox 40/80 M + Active Driver
This product is unavailable in our webshop.Regular Price £1,148.00 Discount Price £899.00N/A7,200 litres per hour59 metres or max. 5,9 bar output (adjustable)5+
-
DAB EuroInox 40/80 M + Active Driver with 7-metre suction hose
+
+
£929.95 £922.21 -
DAB EuroInox 40/80 M + Active Driver with 7-metre suction hose
+
+
£945.95 £931.86
Accessories
Please tick the products to be added to the shopping cart or
Filter
Miscellaneous
Hoses
Coupling pieces / reducing pieces
Sprinklers / irrigation
Miscellaneous
Frequently Asked Questions
● What is the benefit of a booster pump compared to an irrigation pump?
● What can I use this pump for?
● Is it okay to connect this pump to the existing water system in my home?
● What type of water can I pump with this device?
● Is this pump suitable for continuous use?
● Is it recommended to use a pre-filter?
● How should the pump be installed?
● The water the pump has to drain is located at a depth of more than 9 metres, what's the solution?
● What happens if there is no more water available from the source?
● Is this pump suitable for a drinking water system?
● Is the pump delivered ready for use?
● Which items are included in the package?
● What happens if there is no more water available from the source?
● Is this pump suitable for a drinking water system?
● Is it okay to connect this pump to the existing water system in my home?
What is the benefit of a booster pump compared to an irrigation pump?
Generally speaking, a booster pump is an irrigation pump with several additional components, such as:
● A built-in pressure switch, which automatically turns the pump on or off depending on the water requirements.
● A pressure vessel (water reservoir), which provides you with immediate access to water and ensures the pump only has to turn on if the water in the pressure vessel starts depleting.
In other words, in case of small water conlifting stationtion (several litres), a booster pump does not have to operate. When consuming water, the water in the pressure vessel is first used. If the water level in the pressure vessel starts depleting, the pump will automatically switch on in order to supply the vessel. In addition to energy savings, this guarantees a much more silent system and a continuous water supply.
What can I use this pump for?
You can use this pump for the following applications:
● Irrigation and sprinkling of your garden or lawn
● Cleaning your terrace, backyard deck or garden furniture
● (Rain)water supply of your washing machine, toilet, sink, shower, etc.
● Pressure-boosting your water supply
Is it okay to connect this pump to the existing water supply system in my home?
Yes, this pump can be connected to your existing water supply. However, this is not recommended given the non-adjustable, high pressure output of this pump. We recommended the DAB Easybox Minias a more suitable device..
What type of water can I pump with this device?
The DAB EuroInox 40/80 M can only pump clean water, which is to say: water without significant suspended solids (< 2 mm). This means you may also pump water from a canal or ditch, although under a number of conditions:
● We recommend using a suction hose with brass connection (improved filtration)
● We recommend using a pre-filter (additional filtering time before the water enters the pump)
Moreover, the water should never be colder than -10°C and never be warmer than 40°C.
Is this pump suitable for continuous use?
Yes, this pump is ideal for continuous use.
Is it recommended to use a pre-filter?
If the water is approximately identical to drinking water, you will not have to use a pre-filter. However, if the water contains suspended solids (this is the case with water from a ditch or canal), we highly recommend using one.
How should the pump be installed?
The pump and connected system must always be protected against frost and other extreme weather conditions. Therefore always place the pump in a dry space, with an ambient temperature between 5 and 40 degrees, in which the motor can be cooled properly. In addition, all connected pipes must be fully water and air-tight to prevent damage and loss of performance.
The water the pump has to drain is located at a depth of more than 9 metres, what's the solution?
Irrigation and booster pumps can generally suck up water at a depth of 9 metres. If the depth is (sporadically) greater than 9 metres, you must use a borehole pump. A borehole pump is placed in the source and usually has a head rate of 50 metres or more. Please take a look at our selection of borehole pumps.
What happens if there is no more water available from the source?
This pump is water-cooled, which means the pump cools itself with the same water it pumps during operation. When there is no more water from the source (for example, if the water level in the source drops below 9 metres), the pump will continue to operate without water supply. This is also referred to as 'dry-running' and may cause the pump to overheat as a result (potentially causing significant damage).
This pump is not equipped with so-called dry-running protection. However, such a system can be ordered separately. Please take a look at our collection of dry-running protection systems.
Is this pump suitable for a drinking water system?
No, this pump is not suitable for a drinking water system.
Is the pump delivered ready for use?
Yes, this pump is suitable for direct use.
What happens if there is no more water available from the source?
This pump is water-cooled, which means the pump cools itself with the same water it pumps during operation. When there is no more water from the source (for example, if the water level in the source drops below 9 metres), the pump will continue to operate without water supply. This is also referred to as 'dry-running' and may cause the pump to overheat as a result (potentially causing significant damage).
Thanks to the included active system - the DAB Active Driver - this pump is also protected against dry-running. The DAB Active Driver ensures that the pump automatically switches off when there is no more water supply.
Is this pump suitable for a drinking water system?
Yes, this pump is made of stainless steel and is therefore suitable for a drinking water system.
Is it okay to connect this pump to the existing water system in my home?
In combination with the active system, this pump can be directly connected to the water supply system in your home.
Click here to view the possible attachments for the DAB EuroInox 40/80 M
Which items are included in the package?
● DAB EuroInox 40/80 M
● DAB Active Driver
● Cable connection
● Manual
